Mercedes-Benz CD TACHOGRAPH PROGRAMMER CD400 for Mercedes-Benz truck tractor
Bornova/İzmir8485 km to "United States/Ashburn"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+90 553 589...
Show
+90 553 589 10 99
+90 536 327...
Show
+90 536 327 61 72
+90 553 776...
Show
+90 553 776 03 13
Turkey 
Turkey, Bornova/İzmir
Turkey
Turkey, Bornova/İzmir
Lithuania, Kaunas
Estonia, Tallinn
Lithuania, Vilnius
Estonia, Tallinn
Estonia, Tallinn
Lithuania, Vilnius
Romania, Suceava
Greece, PTOLEMAIDA
Lithuania, Kaunas
Estonia, Tallinn
Brand: CD Concept
Condition: New
Made in Belgium
Including cable for digital tachographs, USB update cable and carrying suitcase.
The product is in our stock. Shipped within 1 day via DHL.
Supportted Tachographs;
For Analogs: KTCO 1314/1318, Motometer EGK100, FTCO 1319, MTCO 1324/1390, TSU 1391, VR2400.
For Digitals: DTCO 1381 (DTCO® 2.1 active), SE5000 (Exakt Duo), SmarTach, EFAS-4.
Functional;
W figure determination on measuring track (with optional photo-cell) or rolling road.
K figure measure on KTCO 1314, KTCO 1318 and FTCO1319.
Parameter programming including IMS (Independent Motion Signal) and VDO counter.
Speed simulation and customizable automatic test diagram.
DTCS reading (Digital) and erasing.
Sensor pairing (KITAS activation).
Clock accuracy test.
Workshop card’s PIN recording and input through CD400.
Advantages;
No power connection nor battery charging required, the only tester powered by the tachograph itself.
Compact size, the smallest tachograph tester on the market.
User friendly, clear 4 lines menus, no training required.
Automatic tachograph model detection on power on.
Double accuracy of the W factor measure on track by detecting half pulses.
The only tester being able to reset the odometer and change the sender type on the VR2400.
Flash program memory, easy software upgrade using a serial port or USB serial adapter on any PC.
Languages; English, Deutsch, Espanol, Français, Nederlands, Portugues, Turkish, Romanian, Russian
Size: 150x100x45 mm
Supply Voltage: 9 to 30 VDC
Supply Current: 12mA
Operating temperature: -20....+70°C
Weight: 155g
Inculing Cables;
- CA-DIGITAL-1
-CA-MTCO-1
-CA-1319-0
-CA-EGK100-1
-CA-CROCO-0
CA-KTC0-1
and FC-VR24000-2
We offer discounts on purchases of 10 or more products.
Marka: CD Concept
Durum: Yeni
Üretim Yeri: Belçika
Dijital takograflar için kablo, USB güncelleme kablosu ve taşıma çantası dahildir.
Ürün stoklarımızda mevcuttur. DHL ile 1 gün içinde gönderilir.
Uyumlu Takograflar;
Analoglar için :KTCO 1314/1318, Motometer EGK100, FTCO 1319, MTCO 1324/1390, TSU 1391, VR2400.
Dijitaller için: DTCO 1381 (DTCO® 2.1 active), SE5000 (Exakt Duo), SmarTach, EFAS-4.
Fonksiyonel Özellikler;
Ölçüm hattında (opsiyonel fotosel ile) veya yuvarlanan yolda W rakamı belirleme.
KTCO 1314, KTCO 1318 ve FTCO1319'da K figürü ölçüsü.
IMS (Bağımsız Hareket Sinyali) ve VDO sayacı dahil parametre programlama.
Hız simülasyonu ve özelleştirilebilir otomatik test diyagramı.
DTCS okuma (Dijital) ve silme.
Sensör eşleştirme (KITAS aktivasyonu).
Saat doğruluk testi.
Atölye kartının PIN kaydı ve CD400 üzerinden girişi.
Avantajlar;
Güç bağlantısı veya pil şarjı gerekmez, takograf tarafından çalıştırılan tek test cihazı.
Kompakt boyut, piyasadaki en küçük takograf test cihazı.
Kullanıcı dostu, net 4 satırlık menüler, eğitim gerektirmez.
Güç açıldığında otomatik takograf modeli algılama.
Yarım darbeleri saptayarak yoldaki W faktörü ölçümünün çifte doğruluğu.
VR2400'de kilometre sayacını sıfırlayabilen ve verici tipini değiştirebilen tek test cihazı.
Flash program belleği, herhangi bir PC'de bir seri bağlantı noktası veya USB seri adaptörü kullanarak kolay yazılım güncellemesi.
Diller: İngilizce, Almanca,Lehçe, İspanyolca, Portekizce, Türkçe, Romence, Rusça
Boyut: 150x100x45 mm
Gerilim: 9 ila 30 VDC
Akım:12mA
Sıcaklığı: -20...+70°C
Ağırlık: 155g
Kutu içerisindeki Kablolar;
- CA-DİJİTAL-1
-CA-MTCO-1
-CA-1319-0
-CA-EGK100-1
-CA-CROCO-0
CA-KTC0-1
ve FC-VR24000-2