New Volvo FL fire truck

We are family-owned company established in 1949 and the largest manufacturer in Serbia in our field, with proven expertise and know-how in firefighting, municipal, and road construction vehicles.

We are offering a brend new vehicle with techical details as it follows. Yuu can download the whole PDF brochure for the vehice.

This is a specialised fire vehicle, designed for rapid interventions to extinguish forest fires involving solid combustible materials.
The vehicle's cabin accommodates a driver and 2 firefighter rescuers (1+2). The vehicle is equipped with a robust fire pump, a water tank, and fire-fighting equipment. Its 4x4 all-wheel drive and raised ground clearance ensure good mobility on rural terrain.

Vehicle export price is 260.000 EUR with equippment, or 240.000 EUR without equipment.

1) CHASSIS

Volvo FL 4x4R, 16tona with a day cabin, 1+2 seats
On-road and off-road vehicle
Wheelbase: 3500 mm
Engine power 320 KS, Euro 6
Automatic gearbox with manual gear selection
With off-road tyres


2) WATER TANK

Water tank with a capacity of 4000 litres (+/- 5%) It is made from high-quality stainless steel sheet (INOX material), with baffles to reduce water sloshing during operation, and an electric level gauge with a reading on the pump's control panel. The tank's shape is adapted to the factory-recommended mounting.

3) FOAM TANK

200-litre foam tank made of GFK material. In addition to the opening for adding concentrate and the AT valve, the tank is fitted with all the necessary connections required for linking to the foam system. A foam level gauge is installed in the tank, with a reading instrument mounted on the control panel of the fire pump.

4) FIRE PUMP

● Manufacturer: Jöhstadt, Germany
● Type: TO 3001
● Nominal pump capacity: 2000 l/min at 10 bar and 250 l/min at 40 bar, 3 m suction height

The centrifugal fire pump complies with the EN 1028 standard in all respects..
The pump is equipped with the following connections:
- 2 outlets with 75 mm diameter non-return check valves at the rear of the vehicle (left and right of the pump),
- 1 75 mm crossbar connection for the water and foam monitor mounted on the superstructure deck
- 1 medium-pressure hose reel outlet
- 1 high-pressure hose reel outlet

5) CONTROL PANEL

Waterproof, with manual on/off switches for drive and control functions. Positioned at the rear of the superstructure, it enables full operation and control of the pump from a single location.
Command and controls:
- command to switch on the vacuum device
- return line
- Valve for draining water from the tank into the pump
- medium pressure gauge
- high-pressure gauge
- vacumetar
- hour meter
- tank water level indicator
- STOP switch.

6) PLUMBING SYSTEM

Installation made from stainless steel pipes with an external paint finish.
Intake:
- Ø 110 mm, for external water suction, with stable and blind Storz 'A' couplings
- Water inlet Ø 110 mm with a check valve for supplying water from the reservoir to the pump.
Push pipe:
- Two outlets with Ø 75 mm connections and with fixed and blind Storz 'B' couplings
- return line for the push bar
- A piping system has been installed on the vehicle to mount a stable monitor with a 75 mm inlet nozzle and a flow rate of up to 3,200 l/min at a pressure of 10 bar.

7) NOZZLE MONITOR

An adjustable nozzle monitor with a wide-to-narrow stream pattern is used to direct the extinguishing agent (water) towards the fire. It is located on the roof of the cab at the front of the fire engine. It contains a plate valve which is used to open and close the flow of water through the nozzle, as well as a pressure gauge for monitoring the pressure.

Technical specifications of the monitor:
● water capacity: Q = 2500 l/min at 8 bar
● water jet range at 10 bar and flow 2500 l/min: 78 m
● control by hand
● horizontal movement 360°
● vertical movement -50° do +90°
● inlet diameter 75 mm

8) QUICK INTERVENTION HOSE REELS

The medium-pressure hose reel is installed in the rear storage compartment. The reel is equipped with a hose that complies with DIN EN 853, 30 m long, Ø32 mm, with a spray nozzle. Manual and electric hose rewind with a safety lock.

A high-pressure hose reel is mounted in the rear compartment. The reel is fitted with a hose conforming to DIN EN 853, 60 m long, Ø 25 mm, with a spray gun nozzle. Manual and electric hose rewind with a safety brake

9) SELF-RETRACTING WINCH

Voltage: 24V
Steel rope length: 28m
Towing force: 10.000 kg

The vehicle has 51 peaces of equipment which are all counted in PDF file.